Proxxon 28534 Manuel d'utilisation et d'entretien télécharger pdf (Page 4)

Manual MICROMOT Jigsaw STS 12/E

Inserting and changing the saw blade (fig. 2):

A material oriented speed/stroke can be adjusted by turning

the control knob 1. Use higher speeds for wood, aluminum,

brass and circuit boards, lower speeds for plastics, specially

thin materials and very delicate work pieces.

Do not connect the saw to the power supply before inserting

the blade and remove the plug from the adapter, when

changing the saw blade during operation!

Fig. 2

Important: Only sharp and faultless saw blades will

guarantee adequate cutting results. Please make sure to

replace worn out saw blades in time and verify you have the

appropriate saw blade, when working with different types of

material.

Safety regulations:

• Do not lay down machine on your workbench while

running.

• Do not leave running machine unattended.

Insert the saw blade 1 into the slot of the piston and tighten

the clamping screw 2, using the included Allen key.

• Let children only operate the unit, if under supervision of

adults.

• Wear safety goggles.

• Make sure that the work piece is always securely

fastened.

Working with the unit (see fig. 3):

• Do not force the unit. Let the saw blade do the work!

Connect the jigsaw to the chosen power source (see above)

and switch it on via the rocker switch 2:

• Store saw blades securely.

• Unplug the tool before carrying out any work on the unit.

Fig. 3

• In any case ensure that the switch is set to the off

position in order to prevent the unit from starting up again

accidentally or unexpectedly.

1 2 3 4 5

Pas de commentaire

Proxxon 28534 Manuel d'utilisation et d'entretien Page 4